DC-DC电荷泵的研究与设计

以Dickson电荷泵的基本原理为出发点，研究了一种将正电压输入转为负电压输出的开关电容电路。由于开关电容的充放电特点，为确定电容时间常数，采用非交叠时钟控制信号避免了由于时钟交叠而造成的当电容充电还未完成即对下一级电容进行放电的现象。同时，参考功率MOS-FET的电容模型通过增大驱动电路的电流减小了开关管的上升延时，提高了开关动作的速度，使转换效率得到明显提高。此电路结构简单，性能优良，易于集成，可广泛应用于输出负电压的电源产品中。     

估计小波系数方差邻域大小的研究

利用小波变换去噪时小波系数方差的估计对去噪结果影响很大。自然图像小波分解后得到的系数在不同的分辨率中差异很大,所以利用邻域估计中心点方差时,不同分辨率应有不同大小的邻域。首先对在邻域中利用极大似然准则估计中心点方差进行分析,再结合自然图像小波分解后的系数在不同分辨率子带中,根据平稳性和重要性选择邻域的大小。最后进行去噪实验,并取得正交小波分解下理想的去噪性能。     

基于数字化二次曝光干涉的光学元件波前畸变测量

将傅立叶变换条纹分析方法与二次曝光全息干涉计量相结合，提出了数字化二次曝光干涉术，用于测量光学元件引入的波前畸变。文中给出了理论分析，模拟与光学实验结果证实提出的方法具有高精度、快速的波前测量特点，可应用于激光系统中光学元件的波前畸变在线检测。     

A new efficient numerical method and the dynamic analysis of composite laminates with piezoelectric layers

Firstly, a numerical method for the inversion of Laplace transform is developed and its accuracy is shown through examples. Then, a state-vector equation for the dynamic problems of piezoelectric plates is deduced directly from a modified mixed variational principle for piezoelectric bodies and its exact solution for the dynamic problems of simply supported rectangle piezoelectric plate is simply given. For multilayered hybrid plates, we derive the solution in terms of the propagator matrices. The techniques accounts for the compatibility of generalized displacements and generalized stresses on the interface both the elastic layers and piezoelectric layers, and the transverse shear deformation and the rotary inertia of laminate are also considered in the global algebraic equation of structure. Meanwhile, there is no restriction on the thickness and the number of layers. As an application of the numerical inversion of Laplace transform presented in this paper, typical numerical examples of the harmonic vibration and transient response are proposed and discussed. Since the highly accurate numerical results, they can serve as benchmarks to test various thick plate theories and various numerical methods, such as the finite and boundary element methods for transient response problems.     

我国炼油技术开发的若干思考与建议

分析了我国炼油工业面临的挑战，世界炼油工业的发展趋势，提出了我国炼油技术开发要围绕符合国情的清洁燃料生产技术，炼油与化工结合的炼油技术，适合现有炼油装置技术改造、提高技术水平，降低加工成本的技术，渣油转化技术，煤制油，天然气制油技术，炼油厂智能化的技术，减少炼油厂烟尘排放的技术等7个方面开展工作的具体建议。     

重油催化裂化装置的技术改造

介绍了福建炼油化工有限公司重油催化裂化装置自开工投产以来存在的问题，以及针对这些问题进行改造和改造后所取得的成效，如针对原料重质化、重金属含量高，如何提高产品收率；催化剂跑损，第一、二段再生器烟气混合后发生尾燃的现象以及汽提效率、烧焦效果等问题得到了根本的解决。     

A fast digital Radon transform—An efficient means for evaluating the Hough transform

A fast digital Radon transform based on recursively defined digital straight lines is described, which has the sequential complexity of N² log N additions for an N × N image. This transform can be used to evaluate the Hough transform to detect straight lines in a digital image. Whilst a parallel implementation of the Hough transform algorithm is difficult because of global memory access requirements, the fast digital Radon transform is vectorizable and therefore well suited for parallel computation. The structure of the fast algorithm is shown to be quite similar to the FFT algorithm for decimation in frequency. It is demonstrated that even for sequential computation the fast Radon transform is an attractive alternative to the classical Hough transform algorithm.     

数字图像纯位相编码分析

研究了图像傅立叶变换过程中的振幅与位相问题，突出了位相在整个变换中的重要性，并利用双位相函数对图像进行加密编码和解码，计算机模拟表明双位相编码和解码能有效的抑制附加噪声。     

Argon I Lines Produced in a Hollow Cathode Source, 332 nm to 5865 nm

We report precision measurements by Fourier transform spectroscopy of the vacuum wavenumber, line width, and relative signal strength of 928 lines in the Ar I spectrum. Wavelength in air and classification of the transition are supplied for each line. A comparison of our results with other precision measurements illustrates the sensitivity of Ar I wavelengths to conditions in the light source.     

Dual reaction capacity of hydrogenated nanodiamond

High temperature hydrogen stream treatment of nanodiamond was shown to produce nanodiamond with bifunctional surface. OH- and different CH-groups were shown to be the main functional groups on the surface. In this article we proposed two main strategies for further chemical modification of hydrogenated nanodiamond. OH-groups were shown to react with different types of acylating agents: anhydrides and chloranhydrides. Chlorination of hydrogenated nanodiamond with molecular chlorine and its subsequent treatment with alkyllithium reagents resulted in formation of alkyl-nanodiamonds. Chlorination was shown to reduce the size of nanodiamonds aggregates. We have also applied suspension-state NMR-H1 spectroscopy to study suspensions of alkyl-nanodiamonds for the first time.